How Do You Inflate A Towable Tube With An Air Compressor?

Nowadays, towable tubes are very popular for getting the proper relaxation by floating on water. But these towable tubes must be perfectly inflated or you won’t find sufficient comfort on the water. 

In the worst-case scenario, the towable tubes might get busted when sinking in the water. So you should know how do you inflate a towable tube with an air compressor faultlessly. 

Well, the process doesn’t take much time, but you may face some difficulties while using a compressor. 

First, you need to unroll the towable tube flat on a surface and attach the valve. Then you have to use the air compressor to attach it. After the process is complete, you must check if the towable tube is inflated perfectly or not.

Can You Inflate A Tube With An Air Compressor? 

You can inflate a tube with an air compressor. But you have to follow some steps and safety measurements to do it. Usually, experts don’t suggest using an air compressor to fill a tube, as an air compressor becomes hot while filling a large object. But still, you can use them. You need to use a powerful air compressor to inflate a tube.

You have to keep your concentration on the inflation process all the time to save yourself from caution. Don’t put full pressure on the tube while using an air compressor. Check if the tube is inflated perfectly or not by standing on it. Do the process gradually and you can inflate the tube without any caution.

How Do You Inflate A Towable Tube With An Air Compressor? 

Let’s see the process of inflating a towable tube with an air compressor.

Unroll The Towable

You need to unroll your towable tube flawlessly to inflate it. You need to spread it out straight on a flat surface. By doing this, you can check the inflation process perfectly. It is important to inflate perfectly because the towable tube can get busted when sinking on the water surface if it is not inflated accurately. 

Attaching The Valve

After rolling the towable tube, now you have to attach the valve to the tube. To do this, open the cap of the tube and attach the valve to it. Double-check if it is attached properly or not. 

If the valve is not equipped perfectly, it will leak air. Some valves can attach a safety mechanism that only allows the tube to be filled to the proper pressure and doesn’t feel up much. Consider attaching them.

Inflating With An Air Compressor

120-volt pumps are often used to inflate towable tubes. To use them, either plug them into the cigarette lighter on your boat, vehicle or truck or use an alligator clip to connect them straight to the battery. Keeping this in mind, you’ll need an adapter to convert AC or DC electricity to 120V when utilizing a 120-volt air compressor.

You may use this compressor to deliver air to the towable tube to obtain the desired pressure. Pumps that run on 120 volts connect into a wall outlet, a dock outlet, or a DC-AC converter. An airhead high-pressure 120-volt air compressor is suggested for achieving optimum pressure.

There are little air chambers and valves hidden behind the sidewalls of the towable tubes. To open the flap, insert a blunt instrument inside the valve. Then, to inflate it, insert your pump. When you’re done, replace the cap.

Inflating With An Air Compressor

Checking For Proper Inflation

Stand on the towable tube after inflating to make sure your inflation is correct. When standing on it, your feet should barely sink in. It’s overinflated if your feet don’t sink in at all. 

Remove some air in such an instance. You’ll need to add extra air if your feet drop too much. It’s crucial to keep an eye on your bowl while you use it to make sure it’s properly inflated. 

The air inside your tube will expand after sitting in the hot sun for a long time. It might potentially damage the bladder if it expands too much. 

You compensate, be sure to let some air escape. Your bladder will go floppy if you utilize your tube in cold water. It’s also common for the palate to gradually leak air. When using your tube, keep an eye on how solid it is.

How Much Air Should Be In A Towable Tube? 

You have to check the air in a towable tube by standing on it. When you stand on the towable tube, your body weight puts pressure on its surface. The pressure sinks the tube cover. If you sink a lot while standing on the tube, that means it is under-inflated. As a result, when you put the towable tube into the water, it will sit low in the water.

On the other hand, when you stand on a perfectly inflated towable tube, it won’t sink much. The cover of the towable tube is taut, with fewer crumples. So you ride higher than the water level and enjoy it properly. If you inflate your towable tube properly, the life span of the tube will increase.

Also, keep in mind that different seasons need different air volumes. In summer, the environment is hotter, so the air in the tube expands more. As a result, you might be airing the tube at a regular volume of air. But it will still damage your towable tube. On the other hand, you need more air in winter as the air is compromised in winter. So you have to use more air in your towable tube.

Conclusion

By using the towable tube, you can float on the water for proper enjoyment. But you cannot float perfectly if the towable tube isn’t inflated faultlessly. 

If it is overinflated, it can be busted while floating, and if it is not properly inflated, you can sink into the water. So you have to know how do you inflate a towable tube with an air compressor before using it. 

You can check if the inflation is accurate or not by just standing on the towable tube. If the tube surface droops a little while you are standing on it, the towable tube is perfectly inflated. But when it sinks a lot or doesn’t sink, you have to inflate more air or release some air.

As the air compressor becomes hot when filling large objects, you should use a bigger air compressor. Maintain your focus on the process at all times or you could damage the towable tube. 

Click to rate this post!
[Total: 21 Average: 5]

Leave a Comment